Home > Fax Error > Fax Machine Errors

Fax Machine Errors


Leave the other phone line devices disconnected for now. If faxes are successfully sent to and received from other machines, but not this particular remote machine, then the issue is probably a problem with the remote machine. 252 Telephone line Tait/Getty Images Fax machines are complicated pieces of equipment with delicate sensors, motors and finely calibrated moving parts. Ask the sender what speed the fax machine is using to send, and then reconfigure the local machine to receive at that speed, if possible. http://radionasim.com/fax-error/fax-machine-com-error-232.php

This feature allows the HP fax to work similarly to a dedicated fax line. Do not perform the reset if the product cannot be connected to a computer and configured with the software. During the restart, a screen might appear with the prompt: “Press (key) to Enter Setup”. Navigate to the Power menu.

Fax Error Codes

Retry the fax reception when telephone line conditions have improved. Remote diagnostics cannot occur between machines with incompatible remote versions. Confirm that you can make calls using the telephone. Have the sender send from a different fax machine to see if the error clears. 242 The remote fax machine is attempting to receive instead of send.

Configure the local fax machine to use a slower reception speed. The fax machine will reinitialize when it is plugged back in. Coiling the cable can cause cross talk or echo on the line. Hp Fax Error 344 Distinctive Ring is an optional service available from many telephone companies.

If you have changed any cable connections, try sending and receiving faxes to determine if you still have a problem. How To Disable Ecm On Hp Fax Machine Make sure the remote machine can accept and use polling. Signal strength and quality can be lost with long cables. learn this here now If you are trying to send a color fax and it fails, try sending the same machine a black and white fax.

Wait several minutes between the end of one transmission and the start of the next transmission. 383 ECM Disable ECM, and then try faxing again. Hp 8600 Fax Problems To learn more about why you might need to use Distinctive Ring, go to Using the Distinctive Ring Feature on an HP Fax Product (buu04088) (in English). During the connecting phase, the two fax machines will compare capabilities, exchange information about how the fax is to be sent, and try to establish a reliable transmission speed. See Step four: Final steps for final steps to take before you service your product.

How To Disable Ecm On Hp Fax Machine

Check the phone cable from the wall jack to the fax. Privacy Policy © Copyright 2016 HP Development Company, L.P. Fax Error Codes See Loading Paper. Hp Fax Machine Troubleshooting This is usually located in the Fax History.

The remote machine automatically ended the call immediately before, or just as the local machine answered the call. click site The key to removing jammed paper from a fax machine is to always pull in the direction that the paper naturally travels [source: FineStar Imaging]. Do not send color faxes unless you know the other fax machine is capable of receiving color faxes. If you have a PBX phone system, or an ISDN or DSL modem connected to the line, there may be some phone line configuration problems. Fax Error Codes Ricoh

A complex fax, such as one with many graphics, takes longer to be sent or received. The remote machine disconnected immediately before sending any further fax tones or T.30 frames. The tray set for [Tray Use: Fax] under [Fax Settings] did not contain A4, Letter, or Legal size paper. news Ask the sender to re-send the document in parts as several smaller individual faxes, or to send at a lower resolution. 2XXX32 to 2XXX84 An error occurred while receiving a fax.

If the fax is received, the problem is corrected and the fax machine is fully functional. Fax Error 346 The product only sends the fax at the fastest modem speed the receiving fax machine can use. The power at the remote machine was interrupted, or deliberately turned off causing the fax session to be interrupted.

Error Code(s) Definitions/Causes Solutions 300 The fax session completed without errors.

You may be asked to select your product from a list of models. Save the settings and exit the BIOS. Enter your search term here... Hp Fax Comm Error Disconnect the product from the phone jack and connect a phone.

The product uses the same scanning mechanism for copying and faxing. How Amazon Fire TV Works How Google Glass Works More to Explore About Shows Privacy Ad Choices Terms Store Advertising Careers Contact Us Help HOWSTUFFWORKS ON THE GO Take us with The fax machine will reinitialize when it is plugged back in. More about the author You must disconnect the power cord, turning the fax off using the power button will not reinitialize the fax.

Hang the phone up and either call your phone line number from a phone on a different line (like a cell phone) or have someone call your number. The fax machine doesn't receive or send a fax and prints an error report (buu02549) (in English) Faxes cannot be received but they can be sent Faxes cannot be sent but Disable ECM, and then try faxing again. Before making any calls, change the fax settings to those listed in the table below by pressing the Setup, Menu, or Fax Menu button (depending on the model) repeatedly to access

Type in your model number (HP PSC 2210xi for example). The fax must be connected directly to the wall phone jack and the cable should be plugged into a jack on the fax that is labeled Line, 1 - Line, To You can block certain faxes on some models. Make sure the phone cable routing (and any cables not plugged into the same jack but sharing the same line) is not near any electrical appliances (electric motors, fans, kitchen appliances,

This prevented the fax from receiving any more pages, and caused it to terminate the session prematurely. If it still doesn't ring after replacing the cable, contact your phone company for assistance. Disable ECM. Remove jammed originals, and then place them again.

Retry the fax reception when telephone line conditions have improved. The click, heard for an incoming call, is actually a momentary disconnect of the line. See your browser's documentation for specific instructions. {} Z7_3054ICK0KGTE30AQO5O3KA30U5 hp-support-head-portlet Actions ${title} Loading... The remote machine failed to respond to a fax command from the local machine because the connection was interrupted.

If not, reconfigure the local machine for a normal fax transmission. Install an analog phone line for a fax machine. The original was placed upside down. These problems may be corrected by changing settings or phone line connections.

The remote user canceled the fax transmission by pressing the Stop key immediately prior to, or just as the local machine answered the call. Dial the same fax number you called in Step 3 using the front panel. These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line).